Frequently Asked Questions

Metal Roofing, Siding & Exterior Systems . Ontario’s exclusive ThyssenKrupp steel roof and facade installer

General Questions About Metal Roofing

A professionally installed metal roof in Canada typically lasts 40–70 years or longer, depending on the materials, system type, and environmental exposure. Armoroofing Inc. provides a workmanship warranty on installation. Roofing materials are covered by separate manufacturer warranties. All warranty terms are clearly outlined before project commencement.

We use premium metal roofing materials manufactured by ThyssenKrupp, engineered specifically for Canadian climate conditions. The zinc-magnesium coating offers superior corrosion resistance, strong edge protection, and long-term durability. These materials perform reliably under heavy snow loads, freeze-thaw cycles, moisture, and wind — and are suitable for residential, commercial, and industrial applications.

Yes. Metal roofing is one of the most suitable systems for Ontario’s climate. It handles heavy snowfall, ice accumulation, freeze-thaw cycles, and summer heat without cracking, warping, or degrading. When installed correctly with proper ventilation, a metal roof significantly outperforms asphalt shingles in both lifespan and resilience.

Metal roofing requires minimal maintenance compared to traditional roofing systems. Periodic inspections help ensure flashings, penetrations, and connection points remain watertight. Preventative maintenance supports long-term performance and warranty compliance. Optional maintenance service plans are available on request.

When properly installed with correct fastening, ventilation, and underlayment, a metal roof is not noticeably noisier than asphalt shingles. Noise concerns are typically the result of improper installation, not the material itself. A correctly assembled system eliminates this issue.

Yes. Armoroofing Inc. offers metal roofing and facade material supply without installation. We assist with material selection and technical specifications when required. Manufacturer warranties apply according to their terms when materials are supplied without installation.

New Roof Installation

Our installation process covers every stage from initial consultation to final handover: on-site assessment, scope of work and permit review, material selection, structural preparation, ventilation setup, professional installation, and a final inspection with full cleanup. You receive a written scope and timeline before any work begins.

Yes. We review permit requirements as part of our pre-installation process. Where permits are required under the Ontario Building Code, we advise on the process. All work is carried out in compliance with applicable local codes.

Double strapping is generally required for metal tile and profile metal roofing systems. It creates a stable, level installation base that improves durability, ventilation, and panel alignment. In certain cases — such as specific standing seam systems installed over a solid deck — it may not be required. The final method depends on the roofing system and structural conditions of the individual roof.

Underlayment is a must for most metal roofing installations as an additional protective layer. It helps control moisture, condensation, and wind-driven rain — particularly important in Canadian climate conditions.

Project timelines depend on roof size, architectural complexity, weather conditions, and the chosen roofing system. Most residentiall, commerciall and industrial metal roofing installations are completed within a few days to one or two weeks.

Roof Replacement

Removing existing asphalt shingles is recommended, but not always mandatory. When shingles are in good condition, and there are no moisture, rot, or structural issues, metal roofing can be safely installed over them. Shingle removal becomes necessary if there is active leaks, multiple shingle layers, excessive roof weight, or damaged decking. Each project is evaluated individually to determine the best approach

Replacement is typically recommended when a roof is approaching the end of its expected lifespan, shows widespread water damage, has multiple shingle layers, or requires repairs that exceed a reasonable fraction of replacement cost. During our consultation, we conduct a full structural and surface assessment and provide an honest recommendation — repair or replacement — based on the actual condition of your roof.

All tear-off materials — shingles, underlayment, and debris — are removed from your property as part of our standard cleanup process.

Yes. During tear-off, we inspect every sheet of decking and identify any rotted, soft, or damaged sections. Damaged boards are replaced before installation begins, ensuring the new roof system has a solid, watertight base.

If the existing shingles are fully removed, a waterproof underlayment membrane is installed to help protect the roof deck from moisture and weather exposure before the metal roofing system is installed.If the metal roof is installed over existing shingles, an additional membrane is not always necessary, since the existing roofing layer already provides protection underneath. Proper strapping and installation remain the most important part of the system in these cases.

Metal Siding Installation

We specialize in a range of modern, high-performance steel exterior systems, including Eco Standing Seam Wall Panels, Standing Seam Wall Panels, Snap Lock, Mechanical Lock, and Board & Batten profiles. All systems are installed using ThyssenKrupp zinc-magnesium coated steel and are engineered for Ontario’s climate conditions.

Yes. A weather-resistant barrier is required behind metal siding on all properly assembled exterior wall systems. It protects the wall structure from moisture infiltration and air leakage, and works in combination with correct ventilation to ensure long-term facade performance. Material selection depends on building code requirements and wall assembly design.

When properly installed with correct fastening, ventilation, and wall assembly, metal siding is not excessively noisy. Insulation and wall structure significantly reduce sound transmission. Noise issues are typically the result of incorrect installation rather than the material itself. A properly assembled system eliminates this concern.

Metal siding — particularly ThyssenKrupp zinc-magnesium coated steel — offers superior durability, impact resistance, and freeze-thaw performance. It also offers long-term colour stability, fire resistance meeting Canadian code and fancy looks

Quality, Warranties & Project Process


Yes. We carry WSIB coverage, liability insurance, and all required safety certifications for roofing work in Ontario. Our crews are trained and certified for working at heights and elevated access projects, following Ontario safety regulations and job site requirements.

Quality control is integrated into every stage of our work. This includes a pre-installation site assessment, step-by-step supervision during installation, and strict compliance with approved fastening and installation standards. A final inspection is conducted with the homeowner before project handover. Projects are signed off only after meeting our internal quality requirements.

Two layers of warranty protection apply to every Armoroofing project: a workmanship warranty provided by Armoroofing Inc. on installation quality, and manufacturer warranties on the roofing, siding, or gutter materials supplied. All terms are clearly outlined in writing before work begins.

Yes. As part of the Armotrain group, Armoroofing Inc. is the exclusive roof and facade installer of ThyssenKrupp steel in Canada. This gives us direct control over the full supply chain — from steel production to final installation — with no intermediaries, no delays, and no compromises on quality.

We serve properties across Ontario, including Toronto, Mississauga, Etobicoke, Brampton, Oakville, Burlington, Hamilton, Markham, Barrie, Ottawa, Kingston, Oshawa, Windsor, Niagara Falls, Guelph, Kitchener, London, Sudbury, Peterborough, and surrounding areas. Contact us to confirm availability in your location.

Contact us to schedule an on-site consultation. During the visit, we assess your property, discuss your goals and requirements, and prepare a detailed written estimate. There is no obligation, and the consultation is free. You can reach us by phone, email, or through the contact form on armoroofing.ca.

Get a free estimate

Leave your contacts and a few words about your project — we will call you back and prepare a clear estimate.

Get a free estimate